ITI Electrician
Eligibility
Passed 10th class examination with Science and Mathematics or with vocational subject in same sector or its equivalent.
Duration
2 Years
NSQF Level
Level 4
Mode
Blended Mode
About ITI Electrician
Electrician General; installs, maintains and repairs electrical machinery equipment and fittings in factories, workshops powerhouse, business and residential premises etc. Studies drawings and other specifications to determine electrical circuit, installation details etc. Positions and installs electrical motors, transformers, switchgears. Switch boards and other electrical equipment, fittings and lighting fixtures. Makes connections and solders terminals. Tests electrical installations and equipment and locates faults using megger, test lamps etc. Repairs or replaces defective wiring, burnt out fuses and defective parts and keeps fittings and fixtures in working order. May do armature winding, draw wires and cables and do simple cable jointing. May operate, attend and maintain electrical motors, pumps etc.
During the two years duration of Electrician trade a candidate is trained on professional skills & knowledge, Engineering Drawing, Workshop Calculation & Science and Employability skill related to job role. In addition to this a candidate is entrusted to undertake project work and extracurricular activities to build up confidence. The Broad components covered during the course are given below:
FIRST YEAR
In this year the trainee learns about safety and environment, use of fire extinguishers, artificial respiratory resuscitation to begin with. He gets the idea of trade tools & its standardization, identifies different types of conductors, cables & their skinning & joint making. Basic electrical laws like Kirchhoff’s law, ohm’s law, laws of resistances and their application in different combinations of electrical circuit are practiced along with laws of magnetism. The trainee practices on circuit for single phase and poly-phase circuits for 3 wire /4 wire balanced & unbalanced loads. Skilling practice on different types & combination of cells for operation and maintenance is being done. Wiring practice with installation of different accessories like MCB, distribution fuse box and mounting energy meters are practiced as per IE rules for hostel/residential building, workshop and its fault detection are done by trainee. The trainee will practice for pipe & plate earthing. Different types of light fitting are to be done like HP/LP mercury vapour and sodium vapour are prominent. The trainee will practice on different types of measuring instruments for measurement of electrical parameters in single & three phase circuits. He will gain skill on range extension, calibration and testing of meters. Practice for dismantling, assembling and testing of heating element equipment, induction heating equipment, grinding machines and washing machines will be done by trainee. Skill will be gained on transformer for operation, efficiency, series parallel operation, replacement of transformer oil and combination of single-phase transformers for 3 phase operation. The trainee will practice on winding of small transformer.
SECOND YEAR
In this year the trainee will study the details of electrical rotating machines viz. DC machines, induction motors, alternators & MG sets and practice on them. The trainee will practice on determining characteristics, their performance analysis, starting, speed control and reversing direction of rotation of machines. He will practice on parallel operation & synchronization of alternators, winding practice and over hauling will be practiced for DC machine and induction motors. Practices on diodes for bridge rectifier, switching devices & amplifiers by electronic components, different wave shape generation and testing by CRO. Designing control cabinet, assembling, control elements and their wiring are to be practiced. Speed control of AC/DC motors by electronic controller will be practiced. The trainee will practice on testing, analysing and repairing of voltage stabilizer, emergency light, battery charger, UPS and inverter. He will gain knowledge of thermal, hydel, solar & wind energy systems. The trainee will practice on distribution system, domestic service line and accessories & their protection by practicing on relay and circuit breaker for operation and maintenance. Install and troubleshoot Electric Vehicle charging stations.
Program Objectives
Learning Pedagogy
To impart a comprehensive knowledge in technology to the trainees in a pragmatic way.
Enhanced Career Opportunities
To be a strapping pedestal to key-in and fetch an assortment of job opportunities in the Public and Private Sectors.
Experienced Faculty & Experts
To craft industrial knowledge through captivating professional and cerebral associations.
Program Structure
Year 1
MODULE - 1 : Safety Practice and Hand Tools
MODULE - 2 : Wires, Joints - Soldering - U.G. Cables
MODULE - 3 : Basic Electrical Practice
MODULE - 4 : Magnetism and Capacitors
MODULE - 5 : A.C Circuits
MODULE - 6 : Cells and Batteries
MODULE - 7 : Basic Wiring Practice
MODULE - 8 : Wiring Installation and Earthing
MODULE - 9 : Illumination
MODULE - 10 : Measuring Instrument
MODULE - 11 : Domestic Appliances
MODULE - 12 : Transformer
Year 2
MODULE - 1 : DC Generator
MODULE - 2 : DC Motor
MODULE - 3 : AC Three Phase Motor
MODULE - 4 : AC Single Phase Motor
MODULE - 5 : Alternator
MODULE - 6 : Synchronous Motor and MG Set
MODULE - 7 : Electronic Practice
MODULE - 8 : Control Panel Wiring
MODULE - 9 : AC/DC Motor Drives
MODULE - 10 : Inverter and UPS
MODULE - 11 : Power Generation and Substation
MODULE - 12 : Transmission and Distribution
MODULE - 13 : Circuit Breakers and Relays
Year 1
MODULE - 1 : Safety Practice and Hand Tools MODULE - 2 : Wires, Joints - Soldering - U.G. Cables MODULE - 3 : Basic Electrical Practice MODULE - 4 : Magnetism and Capacitors MODULE - 5 : A.C Circuits MODULE - 6 : Cells and Batteries MODULE - 7 : Basic Wiring Practice MODULE - 8 : Wiring Installation and Earthing MODULE - 9 : Illumination MODULE - 10 : Measuring Instrument MODULE - 11 : Domestic Appliances MODULE - 12 : TransformerYear 2
MODULE - 1 : DC Generator MODULE - 2 : DC Motor MODULE - 3 : AC Three Phase Motor MODULE - 4 : AC Single Phase Motor MODULE - 5 : Alternator MODULE - 6 : Synchronous Motor and MG Set MODULE - 7 : Electronic Practice MODULE - 8 : Control Panel Wiring MODULE - 9 : AC/DC Motor Drives MODULE - 10 : Inverter and UPS MODULE - 11 : Power Generation and Substation MODULE - 12 : Transmission and Distribution MODULE - 13 : Circuit Breakers and Relays
Year 1
MODULE - 1 : Introduction to Engineering Drawing and Drawing Instruments MODULE - 2 : Free Hand Drawing MODULE - 3 : Drawing of Geometrical figures MODULE - 4 : Dimensioning Practice MODULE - 5 : Symbolic Representation MODULE - 6 : Reading of Electrical Circuit Diagram MODULE - 7 : Reading of Electrical Layout Drawing
Year 1
MODULE - 1 : Unit, Fractions MODULE - 2 : Square root, Ratio and Proportions, percentage MODULE - 3 : Material Science MODULE - 4 : Mass, Weight, Volume and Density MODULE - 5 : Speed and Velocity, Work, Power and energy MODULE - 6 : Heat & Temperature and pressure MODULE - 7 : Basic Electricity MODULE - 8 : Mensuration MODULE - 9 : Levers and Simple Machines MODULE - 10 : TrigonometryYear 2
MODULE - 1 : Friction MODULE - 2 : Centre of Gravity MODULE - 3 : Area of Cut out regular surfaces and area of irregular surfaces MODULE - 4 : Algebra MODULE - 5 : Elasticity MODULE - 6 : Heart Treatment MODULE - 7 : Profit and loss MODULE - 8 : Estimation and Costing
Year 1
MODULE - 1 : Introduction to Employability skills MODULE - 2 : Constitutional Values : Citizenship MODULE - 3 : Becoming a Professional in the 21st Century MODULE - 4 : Basic English Skills MODULE - 5 : Communication Skills MODULE - 6 : Essential Digital Skills MODULE - 7 : Diversity and Inclusion MODULE - 8 : Financial and Legal Literacy MODULE - 9 : Entrepreneurship MODULE - 10 : Career Development and Goal -Setting MODULE - 11 : Customer Service MODULE - 12 : Getting Ready for ApprenticeshipsYear 2
MODULE - 1 : Basic Career Skills MODULE - 2 : Future Work Skills MODULE - 3 : Internet Skills MODULE - 4 : Internet Skills MODULE - 5 : Entrepreneurial SkillsProgram Fee
Student has to pay a non-refundable Registration Fees of Rs.500/- to start the Admission Process.
| Sr.No | Fee Component | Year 1 | Year 2 |
|---|---|---|---|
| 1 | Tution Fee | 15000 | 15000 |
| 2 | Examination Fee | 2000 | 2000 |
| 3 | Total | 17000 | 17000 |
Digital ITI – Blended ITI Program Advantage
Accessibility
Online digital learning allows students to access educational content and resources from anywhere, at any time. This makes education more accessible to balance personal, professional and academic life.
Cost-effectiveness
Online digital learning can be more cost-effective than traditional classroom learning, as it eliminates the need for physical classrooms, textbooks, and travel.
Flexibility
We all value autonomy. Online learning allows students to learn at their own pace and on their own schedule.
Innovation
Online digital learning encourages innovation in teaching methods and instructional design. Digital ITI incorporate a variety of multimedia resources, interactive tools, and collaborative learning activities
